1051
Hey !
This is my Volvo 745 TDIC project.
I bought the car in the summer of 2009 commuter car.
The idea was initially just a little bit to restore the car and just drive it.
But suddenly a moped ran out of control and became a full project. 
Technique was originally a D24 + M47.
Today, under the hood is a little tweaked D24TIC and M47 to transmission.
Well pictures of the end, they tell us much more 
For this we went.
Updated the look of the turbo mask, bright flashers around the car and virgo´s
That is it, then the actual project began.
The inside surfaces painting ..
Primed...
Basic color sanded and protected for painting.
Color of the mass on the surface.
Ready bun out of the oven.
Back Wood Cruising in Finland -11
Video: http://www.youtube.com/watch?v=vJEU5RrqD0g
VRCF.FI And Suomenvolvokerho track Days 17.7.11
Multi-X wheels.
USA style, I likes...
And now at this stage.
All Project Photos --> http://s79.photobucket.com/albums/j139/ … lvo%20740/
Finnish project diary --> http://www.vrcf.fi/foorumi/index.php?topic=522.0
I'm sorry that I write in English but some of it better than the Swedish
Senast redigerat av Volvomies89 (27 januari 2014)
Today I began installing Webasto.
I got quite a lot done tomorrow, but there should still be installed:
- Fuel Line
- Fuel Pump
- The fuel tank inlet pipe.
- Clock cable set.
tomorrow will continue
This is oossom There are two colors above others, laserblue and saffron.
I like look with Gemini`s, but with Polaris or super DTM rims it would be perfect.
Thanks 
At last I found this M90 gearbox.
Its installation is next.
After all, those M47 gearboxes already broken two pieces
On Saturday I went to Backwoods Customs and organized by the ice during the day.
Spike tires I put on Volvo exchanged and no more than to drive.
It was a fun ride, the lock rear would have been an absolute yes.
Photos:
And the end of a few video clip:
http://bumax.kuvat.fi/kuvat/Tapahtumat/ … MG0802.AVI
http://bumax.kuvat.fi/kuvat/Tapahtumat/ … MG0838.AVI
http://bumax.kuvat.fi/kuvat/Tapahtumat/ … MG0875.AVI
Pim_Pim skrev:
Nice Volvo u got there !
Thanks
Today I started to tape the plastic parts of the interior carbon fiber tape.
Continued ...
Senast redigerat av Volvomies89 (28 februari 2012)
Again become a little something done to the car.
Transmission changed to M47 -> M90. Now I can drive by car, ease of operation up to a new level.
the interior has also become built, ahtopainemittari found a place in the dashboard.
Carbon fiber tape and come here to put there.
I also took off the Extra lights for the summer.
Pictures from the end.
Volvomies89 skrev:
Pim_Pim skrev:
Nice Volvo u got there !Thanks
Today I started to tape the plastic parts of the interior carbon fiber tape.
Continued ...
http://i79.photobucket.com/albums/j139/ … CN1702.jpg
How did u get so nice edges? heat gun?
Heideken skrev:
Volvomies89 skrev:
Pim_Pim skrev:
Nice Volvo u got there !Thanks
Today I started to tape the plastic parts of the interior carbon fiber tape.
Continued ...
http://i79.photobucket.com/albums/j139/ … CN1702.jpgHow did u get so nice edges? heat gun?
Jeah, heat gun when heated and stretched so successful rigorous corners.
Also requires time and nerves
After a long time here comes writing lately.
The car has come a few small updates.
Pictures tell more.
In The BackWood Cruising 19.5.12 Kajaani Finland
Senast redigerat av Volvomies89 (22 maj 2012)
Long time no update here.
Volvo working properly last summer, but decided in the autumn of the timing belt break while on the road.
For this reason, the entire engine was destroyed.
At this point, however, is not disclosed, but was bought Volvo 850 TDI from the device to the engine in place of
Electrical work not need at all to do, because my friend built for me completely the mechanical injection pump.
And the injection pump works really well.
Probably this is the first Finnish D5252T engine which acts as a mechanical injection pump.
Skip to end pictures and video engine test.
to technical donor.
Bye bye D24TIC, rust in peace...
D24 oil pan which was shortened suitable for D5252T
Testing...
all most ready..
edited oil pipeline.
experiment that will fit.
installing the lugs.
The video engine from running.
http://www.youtube.com/watch?v=OpFN4hFZ8_g
And this again will be continued
Is it time for a big job to fit.
I'll post pictures of this so they can see what is required to make.
850 TDI radiator and electric fan.
760 PRV stabilizer bar.
aftermarket intercooler.
3" downpipe.
Wiring will have to make for yourself.
Something has to be done again the car..
In summer, it seemed that would already be done. And the next was supposed to start only to clean and paint the engine room but how did things again ..
New brakes..
The new turbo is a test run carried out and everything works fine.
the car still lack race fuel injectors, nozzle change after goes to measure power...
