10 657 visningar (1 idag)
36 kommentarer
Effekt / Vridmoment
591 hk / 710 Nm
Motor, växellåda och avgassystem
RT Spec Custom engine re build
Brand new RT Polished / ported and flowed Three angle cut valve seats with RT Custom uprated valve springs, head modified to suit new springs / Inlet manifold to suit flowed throttle body.
76mm throttle-body 960/V90 / RT Custom Design High Strength Engine block liners / modified machined blocks.
RT High spec / Conrod's high quality with uprated gudgen pins
The RT High spec Pistons with High Grade Heat to Our own design and all Party Cam Engine / Flywheel / pulleys / crank HAD / Pistons and rods were all dynamically balanced.
RT Custom out of billet cams designed by us.
Custom tubular exhaust manifold and exhaust 3.5 inches Made in stainless steel re pack variable silencer for noise's index, etc.
Ceramic coating to manifold and down pipe sections and Rest of Systems Heat wrapped
Garrett GT35R turbo running 2.5 bar
Tial 44mm external Wastegate with Autronic Boost Controller
Iridium Sparkplugs
K & N cone filter large
Spec R Breathe systems with all new Collector Using Aeroquipt Hoses and connectors
Spec R Group A dump valve
ARP studs and the nuts for all the manifold and turbo connections
RT Design heat shield around the master cylinder area / transmission tunnel sections
Carbon fiber trim boot cover,
Carbon fiber weave with Yellow Spark Plug cover, and throttle-body cover,
Carbon fiber front lip spoiler
Brand new RT Polished / ported and flowed Three angle cut valve seats with RT Custom uprated valve springs, head modified to suit new springs / Inlet manifold to suit flowed throttle body.
76mm throttle-body 960/V90 / RT Custom Design High Strength Engine block liners / modified machined blocks.
RT High spec / Conrod's high quality with uprated gudgen pins
The RT High spec Pistons with High Grade Heat to Our own design and all Party Cam Engine / Flywheel / pulleys / crank HAD / Pistons and rods were all dynamically balanced.
RT Custom out of billet cams designed by us.
Custom tubular exhaust manifold and exhaust 3.5 inches Made in stainless steel re pack variable silencer for noise's index, etc.
Ceramic coating to manifold and down pipe sections and Rest of Systems Heat wrapped
Garrett GT35R turbo running 2.5 bar
Tial 44mm external Wastegate with Autronic Boost Controller
Iridium Sparkplugs
K & N cone filter large
Spec R Breathe systems with all new Collector Using Aeroquipt Hoses and connectors
Spec R Group A dump valve
ARP studs and the nuts for all the manifold and turbo connections
RT Design heat shield around the master cylinder area / transmission tunnel sections
Carbon fiber trim boot cover,
Carbon fiber weave with Yellow Spark Plug cover, and throttle-body cover,
Carbon fiber front lip spoiler
Effekt och prestanda (ingående)
591 HP / 524 FTLbs Online Race Fuel 2.3 bar
535 HP / 478 FTlbs on fuel pump 3.2 bar
No idea of performance times as ITS Yet Still Needs to Be properly tested.
535 HP / 478 FTlbs on fuel pump 3.2 bar
No idea of performance times as ITS Yet Still Needs to Be properly tested.
Chassi
IPD Anti Role bar kit front / rear,
Adjustable Anti Role bar end link
Full Custom Roll Cage with windscreen Caterpillar Support
Modified Design of steering's Support
RT Designed satin upper engine stabilizer mount with Strut brace Fixing Points
RT Custom Made Alloy subframe bushes
Poly Wishbone Arm Bush / Yellow Top engine mount bush / PowerFlex custom made yellow poly bush bulkhead mount bush / lower torque arm mount poly bushes
RT Custom front straight cone brace
Adjustable Anti Role bar end link
Full Custom Roll Cage with windscreen Caterpillar Support
Modified Design of steering's Support
RT Designed satin upper engine stabilizer mount with Strut brace Fixing Points
RT Custom Made Alloy subframe bushes
Poly Wishbone Arm Bush / Yellow Top engine mount bush / PowerFlex custom made yellow poly bush bulkhead mount bush / lower torque arm mount poly bushes
RT Custom front straight cone brace
Fälgar, däck och bromsar
Ap 325 mm front big brake kit, with Carbotech XP8 Pads
Volvo V70R 330 mm Rear discs and calipers with Ferodo DS 2500 pads R
KW Race Two Way Adjustable Coilover kit with adjustable bump and rebound adjustment and camber, corner weighted
18 inch silver OE Volvo Pegasus Alloys Wheels
Tyres 225/40/18 Dunlop Do3J's Cut with road legal slicks
RT pedal box and brake bias valve
Large Girling design of brake fluid reservoir
Momo Steering Wheel 330mm
Complete Braided brake lines front to back
Volvo V70R 330 mm Rear discs and calipers with Ferodo DS 2500 pads R
KW Race Two Way Adjustable Coilover kit with adjustable bump and rebound adjustment and camber, corner weighted
18 inch silver OE Volvo Pegasus Alloys Wheels
Tyres 225/40/18 Dunlop Do3J's Cut with road legal slicks
RT pedal box and brake bias valve
Large Girling design of brake fluid reservoir
Momo Steering Wheel 330mm
Complete Braided brake lines front to back
Interiör / Inredning
Full Custom Roll Cage with windscreen Support
Modified Design of steering's Support
Autronic SM4 standalone ECU wiring loom complete with standard features Anti Law / fully launch control / traction control
Autronic 500R CDI unit with five coils individualistic (Volvo 960/V90) new custom loom for unit to coil Designed and Made for us.
Walbro 255 in tank pump Firing Into Bosch 044 fuel pump and custom fuel filters
Siemens 830 cc fuel injectors
Volvo Engine bay wiring all removed from engine bay and All other wiring hidden Where Ever Possible
AIM digital dash display Covering all the sensors to the oil temp / water temp / Oil pressure / exhaust gas temp / boost pressure / speed / tacho / gear number in a custom carbon fiber surround
Interior Completely stripped of all plastics (apart from dash), Any excess wiring, carpets, rear window motor door cards, rear seats removed, Volvo, modified dash and replaced with a non wood effect look, carbon fiber inserts in dash, wiring hidden from view Where Ever Possible, sunroof cassette removed and replacement roof skin 'over the' 'Fitted' original.
Carbon Fiber Switch Panel for Heat / Anti-Law / traction control / launch control
D2 lightweight front seats
Custom seat frames and runners
Willan 3 inches Four Points Harness Kits
Poly Wishbone Arm Bush / Yellow Top engine mount bush / PowerFlex custom made yellow poly bush bulkhead mount bush / lower torque arm mount poly bushes
RT Custom front straight cone brace
RT Custom rear cone brace incorporating harness attachment's
Battery relocated to the boot area with all new high-gauge wire through out Used
Aqua Mist Water Injection Kit with Two jets controlled by the SM4
Water Injection 2 liter tank with level sensor light
Battery relocated to the boot area with all new high-gauge wire through out Used
Any party cleaned and repainted or Powder Coated to match
RT Custom Intercooler with Three inch custom alloy pipe work.
RT Custom front panel, modified and re Strengthened
RT Custom modified re Strengthened bulkhead made to fit new pedal box design / steering column
Aeroquipt Hoses on all fuel and water lines
Modified Design of steering's Support
Autronic SM4 standalone ECU wiring loom complete with standard features Anti Law / fully launch control / traction control
Autronic 500R CDI unit with five coils individualistic (Volvo 960/V90) new custom loom for unit to coil Designed and Made for us.
Walbro 255 in tank pump Firing Into Bosch 044 fuel pump and custom fuel filters
Siemens 830 cc fuel injectors
Volvo Engine bay wiring all removed from engine bay and All other wiring hidden Where Ever Possible
AIM digital dash display Covering all the sensors to the oil temp / water temp / Oil pressure / exhaust gas temp / boost pressure / speed / tacho / gear number in a custom carbon fiber surround
Interior Completely stripped of all plastics (apart from dash), Any excess wiring, carpets, rear window motor door cards, rear seats removed, Volvo, modified dash and replaced with a non wood effect look, carbon fiber inserts in dash, wiring hidden from view Where Ever Possible, sunroof cassette removed and replacement roof skin 'over the' 'Fitted' original.
Carbon Fiber Switch Panel for Heat / Anti-Law / traction control / launch control
D2 lightweight front seats
Custom seat frames and runners
Willan 3 inches Four Points Harness Kits
Poly Wishbone Arm Bush / Yellow Top engine mount bush / PowerFlex custom made yellow poly bush bulkhead mount bush / lower torque arm mount poly bushes
RT Custom front straight cone brace
RT Custom rear cone brace incorporating harness attachment's
Battery relocated to the boot area with all new high-gauge wire through out Used
Aqua Mist Water Injection Kit with Two jets controlled by the SM4
Water Injection 2 liter tank with level sensor light
Battery relocated to the boot area with all new high-gauge wire through out Used
Any party cleaned and repainted or Powder Coated to match
RT Custom Intercooler with Three inch custom alloy pipe work.
RT Custom front panel, modified and re Strengthened
RT Custom modified re Strengthened bulkhead made to fit new pedal box design / steering column
Aeroquipt Hoses on all fuel and water lines
Bilstereo och multimedia
With the Sound of That engine no thanks!
Exteriör / Styling
Complete strip and re paint Of The Side of Car with Primrose Yellow Coloured underseal
Complete strip and re paint of body work antenna hole removed and brackets removed Any Fully repainted inside and out in Primrose yellow paint.
Volvo's bonnet catch and locking catch removed Aero bonnet fasteners added.
Complete strip and re paint of body work antenna hole removed and brackets removed Any Fully repainted inside and out in Primrose yellow paint.
Volvo's bonnet catch and locking catch removed Aero bonnet fasteners added.
Framtidsplaner
600 hp on Pump Would Be Nice
Övrigt
Not given
Ägarförhållande
Bilen införskaffades 31 januari 2006
Skapad
15 maj 2010
Uppdaterad
18 maj 2010
